The monotonicity (Mon) index is used to evaluate the monotonicity of the constructed HI curve40. It is calculated as follows:
$$Mon=\left| {\frac{{\left( {Numbe{r_{}}\,o{f_{}}\,dF>0} \right)…
In this research, an efficient method for the visual inspection of the surface of aircraft is proposed. The Mavic Pro UAV, that can fly for up to 27 min at a speed of 40 mph and in the range of 4. 3mi (7km), is used for airplane surface…
The RIME optimization algorithm, as an advanced optimization tool, integrates the characteristics of traditional and intelligent algorithms. With its excellent global search capabilities and adaptive adjustment mechanisms, it is capable of…
In order to compare the damage difference between coal rock with and without gangue under the impact of the drill water jet and to validate the simulation results, the water jet impact…
The material used in the present work is TC17 titanium alloy, which is a typical α + β two phase titanium alloy with near β mutually. The nominal composition of the material is Ti-5Al-2Sn-2Zr-4Mo-4Cr. The material…
To comprehensively evaluate the performance of the proposed PV-DSTATCOM system, real-time simulations are conducted using the Typhoon HIL 604 simulator, as shown in Fig. 3. The system parameters, detailed in Table 3 are carefully selected to…
This paper uses the NEU-DET29 and GC10-DET30 datasets to verify the effectiveness of RSTD-YOLOv7. The NEU-DET dataset contains 1800 grayscale images with a resolution of 200 × 200 collected in the production environment, consisting…
A nominal 1 kg mass was placed atop each workpiece, and this was restrained by the lower portion of its foam-lined container held in place by a clamp and stand as it was being sanded. This ensured a constant downward force was applied to each…
With regard to isotropic materials, the strength criterion of artificially frozen sand can be expressed by Eq. 2:
$$F(\sigma_{1} ,\sigma_{2} ,\sigma_{3} ,k_{f} ) = 0$$
(2)
where F represents the intensity…
Ispas, A., Craciun, A., Kui, A., Lascu, L. & Constantiniuc, M. Occlusal forces and their transmission to the periodontium. HVM Bioflux. 11(1), 18–21 (2019). http://www.hvm.bioflux.com.ro/docs/2019.18-21.pdf