Category: Engineering

This section will analyze the suggested plan and provide a detailed explanation of it. As previously indicated, worldwide coverage is one of the fundamental difficulties in WSNs. Since the environment’s data that the network controls needs to…

The elastic fastening system is a set of mutually cooperating elements that enable the rail to be attached to the support in the required position, allowing for intentional displacement (vertical, transverse, and longitudinal) while maintaining…

Experimental analysis of water quality parameters

Total dissolved solid (TDS) and electrical conductivity Total dissolved solid (TDS) concentration for the post-rainfall period was 250.74 mg/L and for the pre-rainfall period was 284.10 mg/L….

Unmanned intelligent inspection model

In electric power large-area multi-scene unmanned intelligent inspection technology, when the UAV performs the inspection task, there are three decision points: the circumstances under which to execute the…

Recently, a number of advanced procedures have been proposed to analyze the medical data with better detection accuracy^28,29. In hospitals, the CA tools are commonly adopted to diagnose patients based on the medical data collected during the…

Problem formulation

Flexi-securable operation of several MGs at the same time is formulated here. The proposed scheme has an objective function of the minimization of voltage stability factor, energy cost and loss and is limited by optimal power…

Comparison of stress distribution in spherical and Brazilian disc specimens

Firstly, the horizontal stress distribution of spherical and Brazilian disc specimens under axial compression was analyzed using the finite element method (Figs. 5 and

In response to the slow convergence and low computational accuracy of robot path planning algorithms in partially observable environments, a Deep Attention Q-Network (DAQN)¹⁹ based robot path planning algorithm is proposed.

DAQN architecture

The…

Engineering context

This study adopts the mining-geological conditions of Longwall Face 12,203 in Zhengzhou mining area as the engineering context. The target No.21 coal seam has an average extraction thickness of 11.3 m and overburden depth of…

Influence of lubrication/cooling conditions

Resultant cutting force

During the machining process, the cutting tool undergoes varying forces depending on the workpiece material and the cutting trajectory. Abrupt shifts in contact and movement can…