Author: admin

Continue Reading

  • Thermal engineering of interface adhesion for efficient transfer of CVD-grown TMDs

    Thermal engineering of interface adhesion for efficient transfer of CVD-grown TMDs

    The main steps followed in our procedure are the following:

    1. 1.

      Sample placement. The NCVDS with the as-grown TMD MLs is adhered to a prepared stage with carbon tape (Fig.

    Continue Reading

  • Crystallographic guess-and-check | Nature Materials

    Crystallographic guess-and-check | Nature Materials

    Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain
    the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in

    Continue Reading

  • Smart technique for calculating fault current model parameters using short circuit current measurements

    Smart technique for calculating fault current model parameters using short circuit current measurements

    Basic concept

    The proposed algorithm detects the fault state and estimates the fault current parameters using the fault voltage and current data measured by three-phase voltage and current transformers, respectively, at one terminal of the…

    Continue Reading

  • Ethical considerations and robustness of artificial neural networks in medical image analysis under data corruption

    Ethical considerations and robustness of artificial neural networks in medical image analysis under data corruption

  • Arya, K. V., Rodriguez, C., Singh, S. & Singhal, A. Artificial Intelligence and Machine Learning Techniques in Image Processing and Computer Vision. (2024).

  • Hilpisch. Y. J. Artificial Intelligence in Finance: A Python-Based Guide (2020).

  • Continue Reading

  • Experimental study on the influence of recycled aggregate substitution rate on the mechanical properties of recycled aggregate concrete under sulfate erosion conditions

    Experimental study on the influence of recycled aggregate substitution rate on the mechanical properties of recycled aggregate concrete under sulfate erosion conditions

    Experimental phenomena

    No significant external damage was observed on the specimens after sulfate erosion; however, a layer of white sulfate crystals precipitated on the surface. This crystalline layer thickened with increasing immersion time….

    Continue Reading

  • Accurate identification of bovine deltapapillomavirus in equine sarcoids by ddPCR

    Accurate identification of bovine deltapapillomavirus in equine sarcoids by ddPCR

  • Nasir, L. & Campo, M. S. Bovine papillomaviruses: their role in the aetiology of cutaneous tumour of Bovids and equids. Vet. Dermatol. 19, 243–254. https://doi.org/10.1111/j.1365-3164.2008.00683.x (2008).

    Article 
    PubMed 

  • Continue Reading

  • Impact of double split slot geometry on aerodynamic performance of modified airfoil for wind turbine blades

    Impact of double split slot geometry on aerodynamic performance of modified airfoil for wind turbine blades

    Mesh topology and grids

    In the near-wall region of the airfoil, 25 quadrilateral cells were employed within the inflation layers (Figs. 4 and 5) at a growth rate of 1.1 to capture boundary layer phenomena accurately. The rest of the computational…

    Continue Reading

  • Early transition to near-zero emissions electricity and carbon dioxide removal is essential to achieve net-zero emissions at a low cost in Australia

    Early transition to near-zero emissions electricity and carbon dioxide removal is essential to achieve net-zero emissions at a low cost in Australia

    In this study, we examine whether Australia has the capacity to develop negative emissions technologies and land-based carbon removals as part of its strategy to achieve NZE. Our model recognises that not all countries will be able to reach…

    Continue Reading

  • Photoemission electron microscopy for 2D materials

    Photoemission electron microscopy for 2D materials

    Two-dimensional (2D) van der Waals materials are promising candidates for next-generation quantum, plasmonic and optoelectronic devices due to their tunable electronic properties, environmental stability, and flexibility for device and…

    Continue Reading